Tools for structural two part fasteners
Lockbolts are especially strong fasteners which provide high strength joints. The tools needed to install this type of fastener are designed to generate extremely high pull forces and have special nose equipment designed specifically to install lockbolts. The trade name for Avdel lock bolts is Avdelok, although they are also commonly known as Huck bolts.
A powerful fast and lightweight cordless tool designed to install Avdel Neobolt lockbolts in 6.4mm and 8.0mm diameters
The Genesis LB is a light, ergonomic tool designed to place 4.8 and 6.4 mm diameter Avdelok and Maxlok lock bolts. Based upon the popular Genesis G2 rivet tool the Genesis LB has a fast cycle time and a positive push off function.
The ProSet XT3 is a versatile tool designed for use with large diameter rivets, structural fasteners, 4.8mm lockbolts and Avseal 6.0 to 9.0mm in diameter. The long stroke allows fasteners such as Monobolt to be installed in a single pull of the trigger. The ProSet XT3 shares the convenient quick release nose equipment with its smaller brothers and is similarly light weight and easy to use.
The Proset XT4 is the most powerful tool in the range and is suitable for installation of Avdelok, Maxlok and Avtainer Lockbolts as well as Avseal plugs from 6.0 to 12.0mm diameter. Despite its abilities it still only weighs a little over 2.0 kg.
A heavy duty, dedicated lock bolt tool, the 73200 is capable of placing 4.8, 6.4, 8.0 and 10.0mm lock bolts and up to 16.0 mm Avseal plugs
The 7287 consists of a lightweight hand tool connected to a powerful intensifier unit via a flexible umbilical hose. The tool is designed for the installation of large diameter fasteners.
The 734 Hat Tool is used for placing two part structural Fasteners from 12.7 to 28.6 mm diameter. It can also be used to install 15.0 and 16.0mm diameter Avseal sealing plugs aand all sizes of Avbolt.