Breakstem rivet systems
Breakstem fasteners allow the simple and fast assembly of two or more components from one side of the application. For many years rivets have been used in all types of industry where a cost effective and permanent method of assembly is required. For over fifty years Avdel has been at the forefront of rivet design and manufacture. Whilst most people think that a rivet is just a rivet, Avdel fasteners have important additional features that can help in achieving a lasting and high quality result.
Browse these categories under "Breakstem rivet systems"
A highly versatile, multigrip rivet with a long and reliable track record. The aluminium or steel body with a positively retained steel stem gives excellent hole fill
Produced in both zinc plated mild steel and stainless steel, Stavex has exceptional multigrip capabilities. One rivet length covers numerous material thicknesses
Avibulb is a zinc plated and clear passivated fastener providing high shear and tensile strength. Identical in design to Avinox 2, Avibulb combines high performance with excellent cosmetics.
Avinox is a very high strength all stainless steel rivet with a large, neatly formed blind side tail.
All aluminium fasteners with a long tail that splits and folds into three lobes when placed. Bulbex and LSR rivets are suitable for the assembly of soft or fragile material including board, wood, fibreglass, plastics etc.
Bulbex rivets are available in 4.0 or 4.8 mm diameters
LSR rivets are available in 3.2, 4.0 and 4.8mm diameters
An all steel fastener with high resistance to pull out loads. Designed to anchor into softer materials T-Lok is suitable for fixing metal to wood, wood to wood, board to low density plastic etc.
A two piece breakstem fastener consisting of a rivet and tubular mating component which is installed from the reverse side and provides a wide grip range, controlled clamp and a large bearing area on both sides of the application.
