Moulded in inserts
- Installed during the moulding process
- Strong permanent threads
- Available from M2.5 – M10
- Brass, aluminium or stainless steel
Installed during the moulding process the inserts are located in the mould cavity by core pins. When the mould is opened the core pins are withdrawn leaving the inserts permanently encapsulated in the plastic section with only the heads exposed.
Installing the inserts during the moulding process eliminates the need for secondary operations or additional installation equipment.
Blind threaded inserts. Blind-end protects the threads from plastic intrusion. Thread sizes #2 to 3/8" and M2.5 to M8. This range is available in aluminium, brass and stainless steel.
Self-locking blind threaded inserts. Deformed threads lock screw in place to resist vibration. Blind-end protects threads from plastic intrusion. Thread sizes #2 to 1/4" and M3 to M6. This range is available in stainless steel.
Thru-threaded inserts. Pilot diameter and undercuts allow plastic to flow into grooves providing high pullout resistance. Thread sizes #0 to 3/8" and M3 to M10. This range is available in aluminium, brass and stainless steel.
Thru-threaded inserts. Pilot diameter and undercuts allow plastic to flow into grooves providing high pullout resistance. Thread sizes #0 to 3/8" and M3 to M10. This range is available in aluminium, brass and stainless steel.