PEM broaching fasteners for PC boards

Broaching Type Fasteners KF2, KFS2

Internally threaded fasteners for mounting into P.C. boards. Thread sizes #2 to #10 and M2 to M5.

FOILGARD® Fasteners KPS6

Used in plated thru-holes in multi-layer P.C. boards. The self-expanding shank ensures positive contact with plated thru-holes. Thread sizes #4 to #10 and M3 to M5.

Broaching Type Studs KFH

Studs for mounting into P.C. boards which can be used as solderable connectors as well as threaded fasteners. Thread sizes #4 to #10 and M3 to M5.

Broaching Type Standoffs KFE, KFSE

Standoffs available with or without threads for mounting into P.C. boards, for spacing or stacking.Thread sizes #4, #6 and M3.

Flare Mounted Standoffs KFB3

For spacing or stacking P.C. boards. Special shank is flared to increase pushout resistance. Thread sizes #4, #6 and M3, M4.

Broaching Snap-Top® Standoffs KSSB

Accurately space a P.C. board from another board or metal chassis simply by snapping board on standoff.

Earthing Standoffs SOAG, SOSG

Used to ground P.C. boards to steel or aluminum chassis. Annular projecting teeth eliminate the need for serrated or starwashers to make good electrical contact with the circuit foil. Thread sizes #4, #6, and M3, M4.

SpotFast® Fasteners for joining metal to PCB/plastic panels SFK

PEM SFK series SpotFast fastener creates a permanent, flush joining of metal to PCB/plastic panels. The fastener installs smooth with the top sheet, and flush or sub-flush with the bottom sheet.

Broaching Type Panel Fasteners PFK

Panel fasteners with spring-loaded captive screws for mounting into P.C boards. Thread sizes #4, #6, and M3.