Breakstem rivet systems

Avex - multigrip aluminium rivets

A highly versatile, multigrip rivet with a long and reliable track record. The aluminium body with a positively retained steel stem gives excellent hole fill, and a large blind side bearing area ensures a strong vibration resistant joint. The placed fastener is resistant to the ingress of non pressurised water and air.

Stavex - multigrip steel and stainless rivets

Produced in both zinc plated mild steel and stainless steel, Stavex has exceptional multigrip capabilities. One rivet length covers numerous material thicknesses, and the placed fastener has excellent hole fill properties combined with a large blind side bulb - thus ensuring high strength joints. The placed fastener is resistant to the ingress of non pressurised water and air.

Avibulb - high performance steel rivets

Avibulb is a zinc plated and clear passivated fastener providing high shear and tensile strength. Identical in design to Avinox 2, Avibulb combines high performance with excellent cosmetics.

Avinox 2 - high performance stainless rivets

Avinox 2 is a very high strength all stainless steel rivet with a large, neatly formed blind side tail.

Sealed rivets

SR is a fully sealed rivet for use in applications which have to be fully resistant to water or air ingress.

Bulbex - rivets for soft and brittle materials

An all aluminium fastener with a long tail that splits and folds into three lobes when placed. Bulbex is suitable for the assembly of soft or fragile material including board, wood, fibreglass, plastics etc.

Earth tab - cost-effective earthing

Based upon the high clamp Avibulb 4.0 millimetre diameter rivet, this fastener has the addition of a brass twin tab spade connector.

T-Lok - for wood, board or plastics

An all steel fastener with high resistance to pull out loads. Designed to anchor into softer materials T-Lok is suitable for fixing metal to wood, wood to wood, board to low density plastic etc.

Avdelmate

A two piece breakstem fastener consisting of a rivet and tubular section which provides a wide grip range, controlled clamp and a large bearing area on both sides of the application. Avdelmate can cope with joint up to 98 millimetres thick. Ideal for use in soft, brittle or low strength materials.