 |
74200 Nutsert Air Tool
A fast ergonomically designed tool, designed to place threaded inserts quickly and uniformly. Using a hydro pneumatic spin-pull system the 742 has an automatic action to spin the insert onto the mandrel. Once the insert is engaged, a single pull of the trigger places the insert and reverses the tool off. The total cycle time is no more than a couple of seconds.
Nose equipment is quick and simple to change and mandrels (the only consumable item) are cheap and easy to come by in an emergency. Capable of placing inserts from M3 to M12, the 742 is easily adjusted for different applications without recourse to special tools.
Tool Data Sheet
|
 |
74201 Nutsert Air Tool
The 74201 tool compliments the 74200 model by offering the additional feature of pressure setting so that the insert is always fully formed, regardless of clamping capacity changes. It is designed for applications where inserts are being placed into the same application with varying sheet thicknesses, which is increasingly the case with the use of plastics, composite materials and magnesium and aluminium castings. The 74201 is also advantageous in conditions where swarf may be present at the back of drilled holes and for blind holes where you cannot see if the insert has correctly formed - tube and box section etc.
The tool installs inserts to a set hydraulic pressure (which may be adjusted), rather than operating to a fixed stroke. This eliminates the need to adjust stroke or to use more than one tool to install inserts into different thicknesses, improving product quality and reducing assembly cycle times.
Tool Data Sheet
|
 |
74101 Nutsert Air Tool
Using a rotary air motor and a spin – spin action the 74101 is a straight bodied tool capable of placing lubricated inserts from M3 to M8. Suitable for limited access applications, or suspension over the workbench the 74100 is a simple to operate tool suited to either batch or flow line production.
Tool Data Sheet
|
 |
74110 Nutsert Air Tool
Using a rotary air motor and a spin – spin action the 74110 is a pistol gripped tool capable of placing lubricated inserts from M3 to M8. Suitable for limited access applications, the 74110 is a simple to operate tool suited to either batch or flow line production.
Tool Data Sheet
|
 |
Z200/Z300 Nutsert Air Tools
A low cost and simple to use pistol grip rivet nut placing tool. The Z200/Z300 range is suited to placing mild steel open ended rivet nuts in sizes from M3 to M8. The tools are simple to adjust and nose equipment is quick and simple to change from one size to another.
To place a rivet nut the top part of the rocker action trigger is pulled until the insert is pulled up and the internal clutch ratchets. The bottom portion of the trigger is then pulled and the tool reverses off.
Each tool comes supplied in a plastic carry case, with one set of nose equipment and instruction sheet. Additional nose equipment may be ordered separately.
Tool Data Sheet
|
 |
Z400/Z500 Nutsert Air Tool
A low cost and simple to use straight-bodied rivet nut placing tool. The Z400/Z500 range is suited to placing mild steel open ended rivet nuts in sizes from M3 to M8. The tools are simple to adjust and nose equipment is quick and simple to change from one size to another.
To place a rivet nut the trigger is squeezed until the insert is pulled up and the internal clutch ratchets. The reverse button is then pressed and the tool disengages from the placed rivet nut.
Each tool comes supplied in a plastic carry case, with one set of nose equipment and instruction sheet. Additional nose equipment may be ordered separately.
Tool Data Sheet
|
 |
Z100 Hand Tool
A high quality tool suitable for placing Metric low profile, or large flange inserts. Utilising high quality components this compact tool can place inserts up to M10 in Steel and M5 in stainless steel. Supplied as a basic tool with a choice of separate nose kits to suit M3,4,5,6,8 and M10 inserts. This tool cannot be used to place closed end inserts.
Tool Data Sheet
|
 |
7486 Plier Hand Tool
A compact hand plier suited to placing low profile inserts. Ideal for prototype work, repairs, or light assembly, this tool is available with nose tips to suit M3 to M6 (7486-9601) or M4 to M8 (7486-9602).
Tool Data Sheet
|
 |
7486 Boxed Kit
The 7486 hand plier is also available as an engineers kit, supplied in a robust steel box complete with 20 of each insert size. Ideal for service/repair engineers, the kit ensures that all the components are kept safe for when they are required. Available in two sizes, the M3 to M6 kit (7486-9611) and M4 to M8 kit (7486-9612).
Tool Data Sheet
|
 |
Z120 Rivet Nut Hand Tool
A versatile and well made tool suitable for placing inserts from M4 to M10 in all materials. A special internal cam mechanism makes setting the insert remarkably easy. Unlike most hand tools the insertion mandrel is a standard cap screw. This makes replacement quick and simple.
The tool comes supplied in a plastic carry case with nose kits for M4-M10 and a selection of M5, M6, and M8 BCT steel inserts.
Please Note: The Z120 is the only hand tool we recommend for use with the BCT range of inserts from BBA.
Tool Data Sheet
|
 |
KJ28 Boxed Kit
A heavy duty tool in a robust steel box complete with nose kits for M3,4,5,6,8 & 10. Ideal for low profile, large flange and countersunk head Nutserts in steel and aluminium M3 to M10 and stainless steel M3 to M6.
Tool Data Sheet
|
 |
Z110 Heavy Duty Ratchet Action Tool
A strong and reliable hand tool for placing M6, M8, M10 and M12 Rivet Nuts in Steel and Aluminium and M6, M8 and M10 in Stainless Steel. Supplied in a wooden box with all components for placing Rivet nuts in sizes from M6 to M12.
Tool Data Sheet
|
